Thursday, January 21, 2016

Personalized Jalie 2908 stretch denim jeans

I have been desparate for a new pair of jeans for awhile as my 'good' pair is now being worn while I garden. I bought a jeans kit from Heather Lou Closet Case Files last year. It's a great kit including blue and black stretch denim - a generous amount, Im sure I could make a pair of jeans for my granddaughter with what is leftover, 2 zippers, 3 buttons, rivets, a packet of Schmetz jeans needles,and topstitching thread. I also bought Heather's ebook on making jeans and it is awesome. It contains endless little details that make the difference between an amateurish look and a professional one.

I didn't use the Ginger jeans however as I wanted a flared leg. I have big calves and it isn't unusual for my pants to get stuck on them - not a great look. So I used the Jalie 2908 stretch jeans pattern - 2nd place on the Sewing Pattern Review website for 2015 in the pants division. I

By my measurements, I am a size R on the Jalie sizing chart. I made a muslin using broadcloth as I didn't have any appropriate stretch material. It was scarily tight, especially at the waistband, so I didn't think the added give of the stretch denim would solve the problem. So I made the next size up - S.

I made a couple of changes to the pattern.
1. I traced off all the pattern pieces with a 5/8 inch SA. That way if the pants were still too tight, I had some leeway.
2. I had some cute stretch cotton print with little bicycles on it (from Blackbird Fabrics) in my stash leftover from making my daughter a bike skirt so I used it in the waistband and the front pockets. For the waistband, I folded the pattern piece in half lengthwise and then added the seam allowance to the fold side. Then I cut one piece from the denim and one from the stretch cotton. The only change I made in the front pockets was to turn the pocket facing over so it would be visible from the inside of the jeans rather than from the inside of the pocket. I did leave the pocket lining oriented as instructed in the pattern as I thought the edge of it could potentially be seen from the front.

3. I interfaced the back pockets before adding the personalized design.
4. I made the fly shield as described in the jeans ebook, sewing a diagonal seam at the bottom.
Sewing machines: Janome Memorycraft 6600 professional, Brother 3034D overlocker.
Needle: Schmetz jeans needle

To personalize the jeans, I wanted to put something different on the back pockets. As I am a dual New Zealand and Canadian citizen, I decided to put a maple leaf on one pocket and a kiwi bird on the other. I traced the design onto lightweight tracing paper then pinned it onto the pocket and topstitched directly over the pocket. I used what I think is called a saddle stitch (Mode 2, Pattern 05 on my Janome). Then I just tore away the tracing paper.



For the seams, I had to increase the thread tension to 5.5. I sewed a regular seam L 2.5mm, then trimmed it and overlocked the 2 seams together before topstitching using Gutermann Mara thread at a stitch length of 3.0. For bartacks, I used L 0.5, W 1.5.

The buttonholer on my Janome isn't very reliable so after 3 practise buttonholes and 1 1/2 failed buttonholes on the jeans, I just made the buttonhole using a ZZ stitch (L 0.4, W 2.5 & 5). After opening the buttonhole and applying fray stopper, I went over the sides (ie the 2.5mm width) a second time, just to be sure. I skipped the rivets as I had visions of making unhidable holes with the awl!

The pants fit very well and are really comfortable.  There are wrinkles on the back of the legs but my guess is if there weren't any, it would be hard to sit down.  They don't catch on my calves, no button digging in at the waist, comfortable when sitting, what more could I ask for? Plus I'm sure no one else has a Kiwi and a maple leaf on their back pockets!



Sunday, January 03, 2016

Jasper sweater

The pattern is the Jasper Sweater/Dress from Paprika Patterns (https://www.paprikapatterns.com/ shop/jasper-sweaterdress/). I made the sweater version with the hood. When I saw this pattern, I thought it would be perfect for my daughter who loves to wear sweatshirts with hoods. This pattern is quite stylish - not your standard hoodie. I found a medium weight, very soft, viscose/poly/spandex print with 35% cross-wise stretch and no lengthwise stretch that I thought would be perfect. I bought black ponte for the cuffs but in the end I decided it would look better with the cuffs made out of the same material as the rest of the sweater.

The instructions were easy to follow and I used the tutorials on the Paprika website to do the single welt pockets and the hood. They were very helpful although I still managed to cut the welts outside the pocket opening instead of inside - yikes! Managed to make it all look OK in the end but hopefully I'll never do that again.

Other than shortening the bodice and the sleeve to fit my daughter, the only other changes I made were to understitch the long edge of the hood and I used 2 buttons instead of 3 - easy as they are only decorative. Oh and I also sewed the little gap on the bottom outside pocket edges - not sure if the gap was due to an error on my part or not but it was easily addressed. I used a scrap of navy cotton jersey for the pocket lining.

I haven't mailed it to my daughter yet, so here it is on me. This is a great pattern - easy to make, fits perfectly and is oh so comfy. I would definitely make it again in fact I might have to as my husband didn't want me to give it away!